What is the use of access control for high-end smart buildings

26-07-2019

What is the use of access control with speed swing gate for high-end smart buildings


The high-end CBD is  integrating office, consumption, entertainment and service. In commercial office buildings, traditional access control management is often only set up in various functional areas of non-public areas, while ignoring the control of open access to the office building. In order to improve the security level of the entire office building, it is more important to manage the public area and public area channels to exclude various security risks. Therefore, the speed gates are set up at the controlled entrance for effective management to improve the security of the office building.


A building is made up of many elements, but its entrance is very important, it is equivalent to the business card of the building. A well-thought-out portal solution plays a vital role as a building-style character.


A number of two-way fast and secure passages can be set up at the lobby entrance/elevator entrance/exit to avoid unauthorized access, and the number of security personnel is effectively reduced. The access control system forms a complete management system. Complete efficient management of access control.


When selecting the channel gate, you can select the appropriate channel gate product according to the following points;


A) Make a choice based on the actual situation of the installation space and the flow of people;


B) Select the position according to the width of the installation area;


C) Considering safety; the area of the security door can be relatively low (not less than 900mm); the area of the weak security door is higher (1200mm-1900mm anti-climbing, over)


Tongda Zhi speed gate  technical parameters


1) Chassis size: 1640*76*1000mm (optional chassis lengthening)


2) The composition of the gate: box, swing arm, movement, servo motor, controller, high-grade acrylic sheet or tempered glass;


3) Swing arm length: 250-450mm


4) Maximum channel width: 950mm


5) Weight: 70Kg / Taiwan)


6) Chassis material: GB (304) stainless steel, cover 1.5MM, case 1.2MM (optional material thickening)


7) Drive motor: Servo motor (36V)


8) Input interface: Switch signal or 12V level signal or 12V pulse signal with pulse width >100ms, drive current >10mA


9) Normal service life: >5 million times


10) Communication interface: RS485 standard


11) Passing speed: 40 people / minute (normally open), 25-30 people / minute (normally closed)


12) Gate opening and closing time: 0.7 seconds


13) Time required to enter the traffic state after power-on: 3 seconds


14) Automatic reset time after failure: 10 seconds

Tripod Turnstile manufacture

speed swing barrier





TongdaZhi speed gate  slim and minimal installation space. It has got rid of the rigid, large and wide rigid design concept of traditional gates. Suitable for installation in an environment with simple decoration style and limited installation space. At the same time, the speed swing gate can be made according to the user's needs to produce half-height or full-height type, which is loved by customers.

speed swing gate


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy