Bollard manufacturers teach you that lifting columns often fail and solutions

11-11-2021

                       Bollard manufacturers teach you that rising bollards often fail and solutions


The fully automatic rising bollard adopts a horizontal fixing method, which is more convenient and quicker than other movable road piles. It is fixed to the base by a special fixing device at the bottom of the column body, removing the traditional protruding fixing device on the ground, making installation and disassembly more convenient.


   Mechanical products have a certain period of warranty after they are purchased, but some minor problems, if you can judge and solve them correctly, can be used in time and bring convenience in the future. So what are the common faults and solutions that cause the instability of the automatic rising bollard?


Bollard


   rising bollard often fails and solutions:


   1. The remote control does not work


   There are generally two situations when the remote control does not work: 1. The remote control battery is losing power and the remote control battery needs to be replaced. 2. If the remote control is broken or the antenna is loose, you need to call a repair call to solve it.


   2. The rising bollard goes down


   There are generally three solutions to this situation:


   First, determine whether the lifting operation has not been carried out for more than 2 consecutive days? Is it normal after the lifting operation? This reminds us that the lifting operation should be carried out once a day.


   Next, think about whether the remote control is operated incorrectly? In this regard, you need to check the remote control and operate the remote control correctly.


   Finally, if the rising bollard still slides under normal operation, you need to call for repair in time.


   Three, the rising bollard does not rise or does not rise in place


   There are several reasons for this situation: there are sundries around the column blocking the rising bollard, improper operation of the remote control, tripping of the electric control box, etc.


  Solution: clean up debris, check the remote control, switch on and try again


   If the above three reasons are eliminated, the problem still cannot be solved according to the "Product Manual", and the user needs to call for repair in time.


  4. The rising bollard does not descend or does not descend in place


   The reason why the rising bollard does not descend is not much different from the reason why the rising bollard does not rise. Both are related to the debris around the column and the misuse of the remote control. In addition, it is necessary to check whether the backup battery has electricity and charge it in time. If the problem cannot be solved according to the "Product Manual", the user needs to call for repair in time.


   The above lists four common failures and solutions that occur in the rising bollard. I hope that these common troubleshooting methods can help you quickly find the source of the failure and solve the problem of the rising bollard.

Bollard for bank


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy