Fingerprint swing gate for easy attendance management

21-12-2020


Fingerprint swing gate for easy attendance management



Precautions for using the fingerprint swing gate to quickly pass the door: The following describes in detail how the fingerprint swing gate should be used; the fingerprint swing gate is when employees only need to press the registered fingerprint on the fingerprint window of the swing gate speed pass door when going to get off work. The attendance time record will be kept on the swing gate speed gate. It is based on fingerprint recognition technology. The employee's fingerprint is registered in the fingerprint swing gate in advance, and one person can register multiple fingerprints. When an employee presses a fingerprint, the fingerprint swing gate will search for fingerprint numbers with a certain degree of similarity in the registered fingerprint database. The biggest advantage of the fingerprint swing gate speed gate compared to the proximity card swing gate speed gate is that it can avoid punching in on behalf of the card and no need to buy a card. After years of development, fingerprint recognition technology has been relatively stable, and its use has become wider and wider. There are also shortcomings of the fingerprint swing gate speed gate: there are a small number of people whose fingerprints are not well recognized by the fingerprint machine, and they often cannot be fingerprinted. Therefore, the general swing gate speed gate gate adds a password for attendance. When the fingerprint cannot be printed, You can enter your own number, and then enter the password for attendance, so that loopholes come out, employees can use the password to check attendance. Even so, the attendance administrator can still control who can not print the fingerprint before entering the password, and whether fingerprint attendance or password attendance is used can be found in the attendance system.


Swing gate


Precautions for the use of the fingerprint swing gate speed gate 1. Employees must use registered fingerprints to check attendance. 2. Keep fingerprints clear. Do not use fingerprints that peel too much, too dry, too wet, or too dirty for attendance. 3. Your finger should be placed in the middle of the fingerprint collector, and press it evenly and firmly, and then leave it when you hear (thank you, and show your job number). 4. Unregistered fingerprints cannot be used for attendance. 5. Each employee will only record the first valid attendance time when repeating attendance within 10 minutes on the swing gate speed gate. 6. Attendance must be checked on time during normal commuting, and no attendance is allowed during the rest of the time, otherwise the swing gate speed gate will be handled as early departure or late arrival. (Except for those who go out in the middle of the trip) Time attendance early/overtime 60 minutes time attendance is regarded as invalid data processing (except for overtime). 7. When checking attendance, if you find that the swing gate is shutting down when the speed gate is shut down, please press the power button ◎ at the bottom left corner to check attendance. The following are incorrect methods of pressing: a) not pressing in the center b) not pressing the finger flat c) pressing the side of the finger d) pressing the finger improperly 8. Before pressing the fingerprint, pay attention to whether the finger is clean. 9. Finger dirt and chemical corrosion, according to the proportion of clean fingerprints, will affect the success rate of fingerprint attendance. . 10. When swiping fingerprints, touch the sensor board as much as possible, and do not tilt, scrape, slide, shake, or pull the mirror. 11. Other keyboards on the speed gate of the fingerprint swing gate are not allowed to be pressed casually. After the fingerprint is successfully swiped, no repeated or random swipes are allowed. 12. The fingerprint swing gate will fail to sense the dryness and coldness of the fingers, so you have to deal with it in advance and try again (you can warm and moisten your hands). 13. If the fingerprint cannot be recognized or does not work when the fingerprint is swiped and the gate is fast, the first time to respond to the human resources department and take remedial measures, otherwise it will be regarded as attendance.


Contact information:

Fingperprint

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy