Five common channel gate fault solutions
Five common channel gate fault solutions
Five common channel gate fault solutions
Abstract: As a smart machine, the channel gate will inevitably encounter various problems during use. Here are some common problems analyzed and explained. It is hoped that it will be convenient for the users of the general access gates to do daily maintenance.
Channel gate is an intelligent machine, it will inevitably encounter various problems in the process of using it. Here is an analysis and explanation of some common problems. It is hoped that it will be convenient for the users of the general access gates to do daily maintenance.
1. You cannot enter after swiping or checking the ticket at the gate
Solution: (1). It is possible that a pedestrian has withstood the rotating rod when swiping the card or checking the ticket. Please take a step back and enter. (2) Please check whether the electromagnet is normal. If the voltage of the electromagnet is output in the control part, and the voltage is normal, but the electromagnet cannot be sucked up, just replace the electromagnet.
2, the turntable of the channel gate swings up and down
Solution: (1) The tray of the movement turntable is loose, and the gap between the fits is too large. (2) The tray screws are loose.
3, there are some turnstiles passing by and dropping bars
Solution: (1) The position of the falling rod electromagnet is not installed properly. (2) Power supply problem, insufficient voltage.
4, the turnstiles are powered off but the poles can't be dropped
Solution: (1) Check whether the installation position of the electromagnet is correct, and the spring force of the falling pole electromagnet support is too small. (2) The friction between the turntable and the rotating rod is too large.
5. Sometimes the check-in gates can’t draw the card smoothly
Solution: (1). The two iron pieces at the ticket insertion area of the gate with punch-in function need to be polished smoothly to reduce the resistance of ticket insertion.
Regarding other usage problems of smart channel gates such as three-roll gates, wing gates, swing gates, turnstiles, etc., if you have other difficult to solve problems in handling, you can contact our technical customer service.
