How to maintain speed gate?
How to maintain speed gate?
The speed gate is mostly used in indoor environments and outdoor areas. It is mostly in the automatic operation mode, which reduces a lot of human damage factors compared with the manual door, but it is a piece of electric equipment after all. There are many mechanical parts running inside, which will also produce certain wear and hidden dangers. Therefore, in addition to the quality of the product itself and the standardized operation, the daily maintenance of the speed gate is also very important, which is described in detail below.
The speed gate needs regular maintenance to keep it stable, lubricated, and smooth operation, and reduce the probability of corrosion and rust. For specific maintenance matters, pay attention to the following points:
1. Regularly check the lubrication degree of each operating part of the speed gate every month, and regularly supplement and replace the lubricating oil to ensure the smooth operation of the gate and reduce the wear during operation.
2. The speed gate is generally made of 304 stainless steel. The surface stains of the gate shall be cleaned regularly every month, coated with antirust oil, and then wiped evenly with a towel. Pay attention not to use acidic or alkaline solvent to clean the gate to avoid damaging the gate surface.
3. Clean the dust off the speed gate mechanism regularly every month, supplement lubricant to the rotating part, check the fixation degree of various parts, and check the distance between the positioning plate and the positioning arm. If any abnormality is found, it shall be adjusted to the appropriate position in time. Be careful not to use a wet towel to wipe the card reader, indicator light, and other live components, so as to avoid moisture oxidation and circuit abnormalities.
4. The motor and reduction gearbox of the speed gate are maintenance-free parts, and simple cleaning work shall be carried out regularly. If they are damaged, find the manufacturer for after-sales replacement and maintenance. Be careful not to disassemble and repair them casually, so as not to cause additional damage and make them unable to be replaced.
5. Clean the dust on the circuit board of the chassis regularly every month. The cleaning method is similar to that of the computer motherboard. Use a special hairdryer to blow off the dust, or manually using a brush with a special detergent.
6. Regularly check whether all parts and wires are aged or damaged every month. If abnormal, replace them in time.
7. Regularly check whether various opening functions of the speed gate are normal every month, such as human body sensing, card swiping, and face recognition. In case of abnormalities, adjust parameters or conduct after-sales treatment as soon as possible.
8. Regularly check whether the speed gate operates stably every month, observe whether there is uneven opening and closing action and whether there is abnormal noise. If there is any problem, adjust the structure or conduct after-sales treatment in time.
The above content is about the precautions for daily maintenance of the speed gate.
