How to solve the flap barrier use in community ?
How to solve the flap barrier use in community ?
As the mainstream channel gate products, the Wing Gate is often seen in the subway, communities, schools and buildings. It can be seen that the Wing Gate has been quite widely used. However, the wing gate is used as an electronic device for a long time, and it is easy to fail. For the maintenance personnel of the user, there may be no more understanding of the wing gate, and it is easy to make an error judgment. Today, Zhengzhou Innovation Tongli will analyze the failure and solution of the wing gate from a professional perspective.
French common fault and solution
1. Lower back-to-back arm is turned back and forth or after opening
(1) Test the Hall switch:
A, the procuratorial zero, whether the Hall switch driven is powered;
B, enter the debug menu P00, push the positioning cam and the baffle to make the magnet close to the zero Hall switch and open the Hall switch, the indicator light will brighter, close to the zero Hall switch, the L5 indicator on the motherboard will change, otherwise The Hall switch is damaged;
(2) Check whether the connection between the Hall switch and the motherboard is reliable;
(3) The Hall switch and the connection are normal, the motherboard is damaged.
2. Whether the gate is not active after the valid opening signal
(1) The motherboard indicator is normal. When the active turning signal is given, the L7 or L8 indicates that the lamp is blinking, the direction indicator will become a green arrow (here, including 2 different directions), the shutter no action: detection method : Detecting the PC, the output voltage (AC18V) of the PC, the PD of the Pneware PM, and the detection vertical (5a) fuse is blown; if normal, detect the mA of the MA of the wing gate main board DX terminal (DC24V) ), If there is an output, detecting the motor connection without being soldered; whether the motor is damaged;
(2) The motherboard indicator is not bright, the LED display does not display: Detection method: detects the voltage output (AC12V) of the PX terminal of the pledge plate PX terminal (AC12V); detects whether the lateral (3A) fuse is blown. If all the above is normal, it is determined that the motherboard is damaged;
3, the shutter does not reset it or immediately after the opening of the gate
When the pedestrians pass the gate, the gate is not immediately reset, the gate is in a lock-up state or immediately reset immediately after the opening is in place: Detecting method: First detect if infrared to be used, whether there is a signal output when there is signal output The L2 or L4 indicator will brighten, otherwise the motherboard is damaged; check whether the motherboard parameter setting P08 is set to bring a memory;
4. After power off, the gate is not working.
1) Detect the voltage of the battery (not less than DC9V);
(2) Check whether the line is loose or dewritten, detect the voltage output (DC12V) of the MA and MB of the charging plate, otherwise the charging plate is damaged.
5, the baffle is unlimited and the baffle is not stopped in the post-electric shift.
1) Detect the voltage of the dry battery (not less than DC9V);
(2) Check if the line is loose or deprive, detect the voltage output (DC12V) of the MA, MB of the CON1 terminal of the charging plate, otherwise the charging plate is damaged;
(3) Test zero, open to the Hall switch and motherboard.
6, when it is online, it is separated from infrared to open the gate.
(1) Check if the online line is not connected.
(2) Check the board menu function setting of the motherboard, P04 menu setting function selection (detailed, please refer to the menu debug instructions)
Community special flaw gate troubleshooting method:
The faults common during the use: safety protection device fault, real-time alarm system fault, LED count display fault and intelligent control and management failure. If there is a failure of the above, the unit can be solved according to the following overhaul method, or please call the Wing gate manufacturer to repair.
The wing gate is configured with various read and write equipment, safety protection devices, real-time alarm systems, LED count display and direction instructions, and coordinate the control and management of the smart channel system. Winged Troubleshooting can pass through such four steps.
1. Determine whether the limit photoelectric switch is illuminated by strong light (generally refers to outdoor installation and commissioning):
Detection method: cover the chassis cover; pneumatic fault check If there is a need to open the chassis or machine cover, please use the deep color opaque object to cover the limit photoelectric switch !!
2. The main board is damaged when the limit photoelectric switch and the connection are normal.
3, check whether the connection of the limit photoelectric switch and the main board is reliable;
4, test wing gate limit photoelectric switch:
(1) Check zero, left open in place, and the pledge fault checks whether the right light switch on the right open is powered! Check the 4PIN wires There is no loose or non-contact;
(2) Enter the debug menu P00, the flap fault checks the turning brake shaft to drive the light blocking block sequentially separate the left open, zero and the right open position of the light-optic switch, and the isolation light coupling indicator should be changed. Bright and output voltage is + 12V, otherwise the limit photoelectric switch is damaged.
The above is the fang fault solution, I hope to give you help!
Create Tongtong Technology Wing Gate Types and Features
Type: The wing gate can be divided into vertical flakes and bridge wing brakes.
The size of the bridge-type trapezinated foil wing chassis is: length 1200 * width 300 * high 1000mm.
The bridge-type wing gate is divided into bridge-style luxury wing brakes, bridge sharp corners, bridge octagon wing brakes, bridged stepping round wing brakes, bridge-style right angle brakes.
Standard spiral product function characteristics
The wing gate has fault self-test and alarm prompt function, which is convenient for user maintenance and use;
The operational state of the programmable device is operated by the built-in small fetch plate on the main control board;
The motherboard setting is operated by the LCD screen display, the Chinese display is convenient and fast.
Fire mode setting, gate opportunity to special circumstances, trigger fire mode, gate alarm, gate automatically open.
Memory functions, brakes continuous swipe cards, accurate memory card number and number of people, greatly increase pedestrian pass time.
Networking remote operation, shutter can be connected to remote operation, convenient and customer directly communicating.
The gate password is set, the gate has a password remote lock requirement.
The anti-clip function, when the swing arm reset, automatically rebounds or automatically stops working in the specified time, and the power is very small, and the light alarm function: contains illegal intrusion, and the tail.
The anti-punching function, the swing arm is automatically locked when there is no connection signal; the telescopic arm synchronization function; after the automatic reset function, after the shutter, the system will automatically cancel the user. Passive permissions, the system defaults to automatically reset 10 seconds after opening;
After the power-on passage is automatically opened, the power-on is automatically closed;
You can enter and exit one-way or two-way controls; remote control and management can be implemented directly by managing computers;
Scalable function
Counting function; chassis lengthening, telescopic arm material selection.
