Precautions during the use of flap door turnstile gates
Precautions during the use of flap door turnstile gates
The flap gate organically integrates mechanical, electronic, microprocessor control and various identification technologies to facilitate the use of card reader identification devices such as IC cards, ID cards, barcode cards, and fingerprints.
Independent research and development using enterprise-level technology, testing in many actual projects, centralized channel management, card number management, card swiping management, statistical reports, module management, user management, and a complete authorization mechanism.
The following issues need to be paid attention to during the use of flap barrier gates:
1. During the use of the wing gate, the cardholder should swipe the card outside the yellow line. Do not stand at the infrared alarm of the wing gate and swipe the card. When the wing gate is opened to a certain extent and there is an indication arrow prompt, You can enter, it is best not to stay in it, so as to improve the fluency of the passage.
2. Cardholders should not fold or alter the card, or put the card together with magnetic objects to prevent the card from becoming invalid. If the card is lost, it must contact the management department for re-registration in time to avoid information leakage.
3. The cardholder should swipe the card in the induction area. Don't be too high to avoid the induction area. Don't swipe the card against the induction area. The correct way is to hold the card in the right hand, and place the card directly above the induction area from top to bottom, away from the induction area 20- 50mm is the best. Hearing a "drop" sound proves that the card has been swiped successfully.
4. When someone in front of you swipes your card in the process of passing, people behind must not follow into the passage of the wing gate.
5. The wing gate also needs frequent maintenance. Don't think it is omnipotent. Regularly check the internal and external dust of the chassis to ensure the normal operation of the equipment.
6. If the wing gate is used outdoors, please cut off the power immediately and stop using it under heavy rain and wind. After the rain stops, please open the door of the case to ventilate the inside of the case, dry the water vapor in the case and use it with electricity. When the machine is out of service for a long time and needs to be used again, the cabinet door must be opened for ventilation, otherwise there will be water vapor in the cabinet, which will cause a short circuit when the power is turned on.
