Precautions for daily maintenance of pedestrian gates

20-03-2021

                          Precautions for daily maintenance of pedestrian swing barrier gates


Summary: Precautions for daily maintenance of pedestrian gates 1. During the pedestrian gates reading card (swiping face, fingerprints, etc.), passers-by are strictly prohibited from squeezing, leaning on, or pushing the gates before the traffic indicator turns green. Wings, swing arms, so as not to affect the normal operation of the equipment. 2. When the gate equipment is not in use, it is strictly forbidden to sit or lean on the gate pole, swing arm, or wing, so as not to cause the gate to fail.

Flap barrier maintenance



Precautions for daily maintenance of pedestrian gates

1. During the passway gate reading card (face swiping, fingerprints, etc.), passers-by are strictly prohibited from squeezing, leaning on, or pushing the gate levers, flaps, and swing arms before the traffic indicator turns to green, so as not to affect the normal operation of the equipment run.

2. When the gate equipment is not in use, it is strictly forbidden to sit or lean on the gate rod, swing arm, or wing to avoid unnecessary damage to the gate.

3. Do not use the equipment directly in the open air or in a humid or corrosive environment, so as not to affect the service life of the equipment due to rain, moisture or corrosives. When the equipment is used outdoors, you should add rain shelters such as awnings.

4. When passing through the gates of the pedestrian passage, passers-by are requested to pass as soon as possible, and do not stay in the working area of the gates.

5. When the turnstile is powered off, people must not be in the working area of the turnstile, so as to avoid hurting people by dropping the pole or swinging the arm suddenly when the power is turned on.

6. Please try not to use the gate when there is lightning in the outdoor gate to prevent damage to the gate.

7. Pedestrian access gates should ensure that the protective ground wire of the system is reliably connected to prevent accidents such as injury to personal safety.

8. The housing of the gate equipment is made of matt stainless steel. The exterior must be scrubbed with a soft fabric to keep it clean and clean. Do not scrub the exterior with hard objects to avoid scratches and affect the appearance. At the same time, it is forbidden to wash with water to avoid short circuit of the electronic control system. And damage the equipment.

9. Regularly check the connection of the various moving parts of the gate equipment. If loose nuts, screws and other fasteners are found, they should be tightened in time to avoid long-term operation and cause malfunctions of the gate.

10. Regularly check the connection of the protection ground wire of the system to ensure its reliable access.

11. Regularly check the connectors and connection points of the connection line to ensure reliable connection.

flap barrier gate

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy