Rising bollard usage classification method and principle structure description
Rising bollard usage classification method and principle structure description
With the strengthening of the domestic anti-terrorism situation, the protection of sensitive areas of buildings has become particularly important. The rising bollard is being accepted by more and more users due to its many advantages such as safety and beauty. However, the introduction of rising bollard products into the Chinese market has been relatively short, with little market accumulation and feedback, but the demand has suddenly expanded. As a result, the market products are mixed, and it is not uncommon to see shoddy products and fake products. A large number of users and integrators have become victims of profit-making by some bad businessmen.
Classification of usage:
Open red rising bollard: the lifting and landing of the rising bollard can be automatically completed through legal authorization information. The fully automatic door rising bollard is also the main equipment of various manufacturers of rising bollard products. It is generally used in places where the take-off and landing is relatively poor and there are certain security forces around. .
Semi-automatic rising bollard: The rising bollard is locked or released by a manual key. When the equipment is in the raised state, the key is released and then stepped on with a manual foot. It will automatically lock when it is in place, and it will automatically rise after being released by the key again. This type of product is mostly used in places that rarely need to take off and land, or places where there are no security forces around. The main reasons: one is that the semi-automatic rising bollard saves construction costs, and the other is that the semi-automatic rising bollard does not have a control panel or the control cabinet has high security. For example, pedestrian streets, squares and other places can be used, and in some wider entrances and exits, it can be used with fully automatic rising bollards.
Fixed piling: The part on the road surface and the automatic/semi-automatic rising bollard have the same appearance and material, but they cannot be moved. Mainly used with fully automatic/semi-automatic rising bollard.
Movable road pile: No need to bury deeply, the part on the ground can be removed and removed manually. It is mainly suitable for places with small traffic and is guarded by staff. Due to the need to move, all the cylinders of this type are generally thin and light, which mainly serve as a signal and have weak resistance.
