School gate facial temperature detect flap barrier gate
School flap barrier gate with facial temperature detector
Flap barrier finished installation before school gate openning ,for protecting students' s safety ,
The flap barrier with the function to detect students's temperature and face. improve the the safe of school .
Detials installation site like below:
Parameters
Structure parameters | |
Housing material | 304 grade stainless steel |
Thickness | Cover 2.0mm .body 1.5 mm |
Mainboard | Independent development patent mainboard |
Technical parameters | |
1200x300x1000mm | 1200x300x1000mm |
Lane width | ≤550mm |
Arm Length | 260mm |
Passing speed | 35--50 people/min |
Open/close speed | 0.2sec |
Weight | 55/65KG |
infrared sensors | 5 pairs |
MCBF | 5.000.000 times |
Application | Indoor or outdoor |
Rotating directional | Single way or Bi-directional adjustable |
Noise | <55db |
Operating temperature | -25 to 70℃ |
Relative humidity | 5% to 95% |
Package | Carton box inside. Wooden case outside |
Electronic parameters | |
Power supply | 110-220V/AC, 50/60HZ |
Rated power | 100W |
Input signal | Dry contact |
Driving motor | Brushed motor |
Method of position | Limiter |
Basic Function
² The entry and exit directional can be set independently, free mode / forbidden model
² Automatic reset function: The flap barrier will open the arm after receiving the valid opening signal when standby. The swing barrier will return to the hindered zero position automatically under the following situation:
--. Within the allowed time, pedestrians have been detected to pass through the passageway in specified direction;
--. Over the allowed time, there is no people passing through the passageway.
² Direction indicator: The direction indicator is installed on the top of the housing cabinet to indicate the valid passing direction
Compatibility: Equipped with dry contact signal input interface can make sure compatible with all kinds of
Any interest free to call me!!!
Eva
project manager
+8615875593512
eva@tdzgs.com