Structure and its working principle sharing in full high turnstile
Structure and its working principle sharing in full height turnstilestile
full height turnstile, also called rotating brakes, can be applied to all construction environments, and can solve all control problems of pedestrian entrance passages, can control the gate at any time to lock or unlock the state, up to 20 signal interfaces, convenient user expansion Function. The full-high transverse shutter is actually developed by three roller brakes, drawing on the characteristics of the rotation door (the difference between ZUI is that the block is not a glass door, but a metal fence). According to the high level of the barrier, it is divided into full height turnstile (also called full high gate or full high rotation gate) and semi-high turnover (also known as half-high rotary gate). The full-high relevance is more applicable, including, military management area and import and export Entering a very stringent plant (such as chemical plants, construction sites, etc.). The block of the full-high transition is generally consisting of 3 or 4 metal rods "" (also called three-pole turnover) shape or "ten" shape (ten "shackles (also called the cross gate or cross gate" ), Generally using hollow closed stainless steel tubes, rugged and easy to deformed, to be blocked and released by rotation. It organizes machinery, electronics, microprocessor control and various read and write techniques into one. By configuring a variety of different reading and writing equipment, the performance reliable safety protection device and real-time alarm system and direction instruction interface, joint coordination Implementation of intelligent control and management. The device profile uses stainless steel plate stamping, and the shape is beautiful, rust, durable, and external standard electrical interface can easily integrate the barcode card, ID card, IC card. In this equipment, it provides an in-deputy personnel to provide civilization and orderly, while eliminating illegal personnel will be transferred; in addition, the system also designs the function of meeting the fire protection requirements. When there is an emergency, it is guaranteed that the channel is unimpeded, which is convenient Timely evacuation. The whole height crossover structure and its working principle channel gate mechanical system channel gate mechanical system is divided into structural frame and movement two parts. As a carrier, there is a direction referred to as a carrier, and the movement of the movement is mainly Motors, racks, drive shafts, gate, etc .; channel gate electrical control system electronically controlled system consisting of card readers, main control boards, limit switches, transformers, batteries, electromagnets, relays, etc. Card readers (self-preparation) : After reading the information on the card and determines the processing, issue the application to the main control board (switching signal); the full high crossover system working principle 1) Open the power supply, after 3 seconds, the system enters the working state. 2) Card reader When reading a valid card, the peak will make a pleasing, indicating the success of the read card to the pedestrian; also judgment, processing the information read from the card, and issues an application to the main control board; 3) master control The board receives the card reader and has been integrated, and the motor is effectively controlled to cause the motor to operate, the limit switch controls the motor movement angle. When the gate is opened (normally open mode, the motor does not move), allowing the pedestrian to pass; Full height crossover function and features: 1. With fault self-test and alarm prompt function, it is convenient for user maintenance and use. 2. Mechanical reset function: Mechanical reset function to prevent electrical failure caused by electrical failure. 3, electronic control uses electromagnet drive Safe and reliable 4, power-off starting function: automatic unlocking of the power-off rod, the free pass mode is convenient to evacuate the crowd 5, the anti-punching function, when the opening signal is not received, the telescopic arm automatically locks. 6, anti-rotation Function, the brake rod rotates a certain angle, the strong reverse rotating gate will be devered, the system automatically locks 7, can directly implement remote control management directly through management [full high cross-gate to apply place] transportation site: high-speed rail station, subway Station, airport, terminal, railway station, bus station, ferry port. Office place:, government agency, business building, drug rehabilitation center. Science and education unit: library, college, research institute, kindergarten. Bank, Bank, Hotel, Supermarket, exhibition center, villa, community. full height turnstile
