Structure 、performance、 application and characteristics of Flap barrier Y286
Structure 、performance、 application and characteristics of Flap barrier Y286
1. TDZ-Y286 is a wing gate in our main 286 series. Our series of products have been imitated by many peers on the market, but they can only mimic the model, but not the gods, because we are There are design patents.
2. From the external point of view, this wing gate is designed to adapt to the use of high-end venues such as high-end office buildings, theaters, museums, government offices, offices, etc. This octagonal design, a black acrylic top cover, a stainless steel chassis and a black paint on the front, and a long strip of indicator light in the middle of the paint, can be pulled in an instant with those ordinary square chassis on the market. Open the gap. This shape and this texture can also enhance the quality of the whole place, which is directly felt by our naked eyes.
3. From the structural point of view, it is composed of a case, a motor, a movement, and a gate.
The chassis has been analyzed from the appearance just now,
Motor: Our standard configuration is a brushless motor, which runs more smoothly and accurately than ordinary motors. It only lasts longer and reaches more than 10 million times, which is twice that of ordinary models on the market.
Movement: The structure is independently researched and developed by our company. After more than 10 years of continuous polishing, improvement and perfection, it has now reached a nearly perfect state. Every time it opens and closes, it is very stable, smooth, with low noise, and is using materials. On the other hand, the material used by others is 2 mm thick, we directly use 4 mm, and there is basically no need to maintain it later.
Gate: The one we are seeing now is a 12mm thick acrylic material, which is 2mm thicker than the general gate. I really can’t underestimate this 2mm. Sometimes it's a tiny bit, a thousand miles away. The ram can also be made of red soft rubber according to the scene, or it can be made into a telescopic wing to widen the channel and make the disabled channel. The channel width can be 900 mm.
4. Now we look at the function again,
First of all, our gate opening signal input is a dry contact signal, which means that as long as your access control device can output a signal, it can be directly used to control the opening and closing of the gate. The most common ones are swiping cards, QR codes, fingerprints, passwords, face recognition, electrostatic meters for temperature measurement equipment, etc.,
Then this wing gate comes standard with 8 pairs of infrared sensors, which can bring functions such as illegal intrusion, alarm, anti-pinch protection, reverse retrograde alarm and so on.
The main board of the gate is independently developed by our company. It has a self-check function, which is convenient for maintenance and use. It can also adjust various modes according to the needs of use, such as induction free passage, one-way passage, two-way passage, and other modes. These adjustments directly follow the instructions and operate by pressing the button on the main board of the gate, which is simple.
There is also the main board of the gate that supports secondary development, and can be customized according to customer needs.
5. Summary: This wing gate has unique shape, real materials, stable structure, smooth operation, powerful functions, and can be customized.
Good appearance, high cost performance.
