Talking about the method of swing barrier installation
swing barrier installation Talking about the method of swing barrier installation
Abstract: The wiring is the most complicated in the installation process of the smart swing barrier. Whether the smart swing barrier can operate normally depends on the wiring problem. If the technician does not pay attention to the wiring, it is easy to cause wiring errors. Therefore, the general smart swing barrier will be equipped with instructions and wiring diagrams when it leaves the factory. This greatly saves the wiring time of the smart swing barrier. Whether you are or not
The most complicated part in the installation process of the smart swing barrier is the wiring. Whether the smart swing barrier can operate normally depends on the wiring problem. If the technician does not pay attention to the wiring, it is easy to cause wiring errors. Therefore, the general smart swing barrier will be equipped with instructions and wiring diagrams when it leaves the factory. This greatly saves the wiring time of the smart swing barrier. Regardless of whether you are a professional technician or not, you only need to control the wiring diagram.
swing barrier wiring diagram
For example, the following is an example of wiring pattern for a smart swing barrier:
1. Connect the power cord of the equipment according to the wiring diagram of the swing barrier.
2. If the equipment needs to be equipped with other control systems (such as access control management system, fingerprint management system, consumer management system, etc.), you need to connect the control system output signal line to the 1 (green), 2 (red), 3 of the wiring bar. (Blue) and 2 (red) are common.
3. If you need to use manual buttons to control the turnstiles, you can extend the small button cords that were originally shipped from the factory.
4. If two swing barriers need to be used simultaneously (ie, opposite swing), please connect the cable with the aviation plug to the two gates and plug them in.
Pedestrian swing barrier wiring diagram"
Due to the increase in the frequency of use of smart swing barriers, installation and debugging has become a concern of people, so here is also to explain the function debugging of smart swing barriers for you!
1. Externally connect the incoming and outgoing gate opening signals.
2. When there is no gate opening signal, the alarm will be given when a pedestrian enters from the forward direction. Similarly, when there is no gate opening signal, when a pedestrian enters from the exit direction, the alarm will be issued. "Please read the card" after the sound and light alarm).
3. If two people are too close when passing through (when two people are pasted together), they will be treated as one person if the time is limited.
4. The operating speed of the equipment opening and closing door is adjustable, please refer to the operating instructions of the main board system parameter setting for details.
5. Pedestrian swipe card: When the pedestrian swipes the card, the direction indicator turns into a green arrow, the gate opens, and the delay starts. Within the set passage time (menu P03 value), the gate closes when pedestrians pass, and the green arrow becomes a red prohibition sign. If pedestrians still do not pass through the set pass time (menu P03 value), the gate will be closed and the green arrow will turn into a red prohibition sign.
For more information, please consult the staff of Tongdazhi. I will provide you with professional knowledge about the use and installation of channel gate products such as swing barriers. Solve your problems in selection, installation, use, and follow-up maintenance.
