tripod turnstile access control installation methods and skills
tripod turnstile access control installation methods and skills
Abstract: tripod turnstile access control installation methods and techniques-We often use Chuangxintong tripod turnstile access control products, but for the installation process, you may not understand very well. Chuangxintong Technology will explain to you the tripod turnstile access control installation method and Process. First of all, how to install the three-roll gate access control reasonably, should pay attention to the following issues: Before starting the installation, the three-roll gate access control must be completed with the customer.
tripod turnstile access control installation methods and skills-Chuangxintong
We often use tripod turnstile access control products, but you may not understand the installation process very well. Chuangxintong Technology will explain the tripod turnstile access control installation method and process for you. First of all, how to install the tripod turnstile access control reasonably, should pay attention to the following issues:
Before starting the installation of the three-roll gate access control, it is necessary to conduct a complete communication with the customer to understand the on-site environmental situation and then determine the plan:
1. Work out the construction plan
1. Whether the installation site is used in the open air or indoor, you should choose to wear a waterproof box tripod turnstile for use in the open air to avoid the corrosion of the circuit board due to weather; the choice of waterproof box should also be selected according to the characteristics of the environment. The plastic waterproof box and the radiator system, the iron waterproof box and the temperature control system can be used in the north.
2. Understand the site conditions and determine the choice of three-roll gate access control, such as bridge three-roll gates or vertical three-roll gates, the overall dimensions of the bridge-style three-roll gates: length 1200mm, the overall dimensions of the bridge-style three-roll gates: width 280mm ,Bridge-type tripod turnstile dimensions: height 980mm, tripod turnstile rod to chassis size 50mm, bridge-type tripod turnstile area 200x (280+50 vertical tripod turnstile area: 420x (330+50, When determining the selection, fully consider the gap between the gate and the gate pole (the gap between the gate pole and the chassis is generally 50mm, and the area and placement of each three-roll gate must be very clear.
3. Choose the wiring method according to the distance between the main control computer and the three-roll gate access control (whether to use the open line or the dark line to communicate with the controller (the distance between the general computer and the three-roll gate access control is within 800 meters, we recommend to choose 485 communication, if the distance is more than 800 meters, we choose TCP network communication.
2. Preparatory work before installation of the tripod turnstile
Generally, two plastic pipes of 6-8 minutes should be slotted and pre-embedded on site according to the actual size of the tripod turnstile before installation. A gap of 50-00mm is left between the tripod turnstile and the tripod turnstile to facilitate the opening of the roof later. Cover, adjust the machine, easy to maintain, etc., the equipment and the equipment must be embedded in the power line (strong current, the other rubber tube for signal line , This is likely to cause safety hazards and the communication effect will also be affected. The embedded pipe should be exposed to the ground 30-40mm high, the bridge type tripod turnstile should be on both sides, and the vertical tripod turnstile should be at the bottom of the machine. .
Three, fixed adjustment
The bottom of the fixed part is fixed with 4-M000 expansion screws. It cannot swing. The appearance of the whole machine is the same. (Before fixing, it is better to draw a straight line with a thin line. The vertical and horizontal directions are consistent. The tripod turnstile and the tripod turnstile are connected in series and adjusted one by one. , Until it can be used normally. The tripod turnstile should be placed horizontally with the ground, so that the effect and the life of the tripod turnstile will be in the best condition.
Fourth, install the ground wire of the tripod turnstile
According to the situation that our company has learned in the past, some customers did not have a valid connection line after installing the tripod turnstile. The shell of the tripod gate is mostly made of stainless steel. If the shell is not grounded, it will cause a great safety hazard to the personal safety of the user.
The tripod turnstile access control is one of the most widely used products on the market. It has strong anti-tailing ability, simple operation and good stability. The three-roll gate products are also the earliest channel products on the market. The subsequent swing gates, wing gates, and translation gates are all derived from the three-roll gates. If you still have something you don't understand during use, you can contact our Chuangxintong staff to understand, we will serve you wholeheartedly.
Three-roll gate movement classification and how to choose three-roll gate
The tripod turnstile is a common product in our daily life, which can be seen in many places. Moreover, the tripod turnstile machine is also the earliest channel gate product. It has stable performance, good anti-tailing effect, and simple operation, which are deeply loved by the market. Today, we mainly analyze their characteristics and advantages for the three-roll gate movement.
There are four main types of tripod turnstile movement commonly used in China:
1. Mechanical anti-decreasing and reversing three-roll gate movement: The mechanical anti-decreasing and reversing three-roll gate movement is improved on the basis of a simple electromagnet movement, which can realize anti-reversal and buffer functions.
2. Mechanical simple electromagnet three-roll gate movement: The mechanical simple electromagnet three-roll gate movement is easy to use and simple in function.
3. Ordinary automatic three-roll gate movement: The ordinary automatic three-roll gate movement is realized by the combination of a motor and a special-shaped grooved wheel mechanism. It automatically rotates forward at a certain angle when passing, and people push the gate rod in front to pass.
4. Automatic silent three-roll gate movement: The automatic silent three-roll gate movement is based on the foreign mainstream high-speed three-roll gate, adopts the latest ARM control technology and adopts industrial-grade control processing methods to complete a The new product is very stable during start and stop during the whole product operation process, and can quickly realize the brake lock. It is the first silent and fully automatic tripod turnstile in the industry combined with multi-channel and multi-level sensors. It is the first in China. High-speed silent automatic turnstiles successfully applied and equipped in a large number of prisons.
The core of the tripod turnstile is the core part of the tripod turnstile, which is like a car engine. Therefore, in the process of choosing the tripod turnstile, the tripod turnstile movement is an important indicator for our reference. Of course, some other functions are also very important, such as the requirements for system deployment. If you are buying three-roll gate products, you don't know how to choose a three-roll gate according to your own situation.
