Tripod turnstile maintenance guide
Tripod turnstile maintenance guide
There may be abnormal noise during the use of the tripod turnstile equipment. This situation is generally caused by improper maintenance and poor transmission between the transmission equipment. As long as the maintenance is usually good, there will be basically no abnormal noise of the tripod turnstile. Let's take a closer look at the maintenance method of the tripod turnstile to avoid abnormal noise.
1. During card reading, the user is strictly prohibited from squeezing, leaning, or pushing the brake lever before the traffic indicator light turns to green, so as not to affect the normal operation of the tripod turnstile equipment.
2. When the equipment is not in use, it is strictly forbidden to sit or lean on the brake lever to avoid unnecessary damage to the brake.
3. Do not use the tripod turnstile equipment directly in the open air or in a humid, corrosive environment, so as not to affect the service life of the equipment due to rain, moisture or corrosives. When the equipment is used outdoors, rain shelters such as sun sheds should be added.
4. When passing, the user only needs to push the brake lever gently, and do not forcefully push the brake lever during the passage.
5. When the tripod turnstile is powered off, people should not be under the gate lever, so as not to fall the lever and hurt people.
6. Please do not use this machine when there is lightning, to prevent damage to the gate.
7. Make sure that the protective ground of the system is reliably connected to prevent accidents such as personal injury.
8. The housing of the tripod turnstile equipment is 304 stainless steel, and the surface must be scrubbed with soft fabrics frequently to keep it clean and clean. Do not scrub the surface with hard objects to avoid scratches and affect the appearance. At the same time, it is prohibited to wash with water to avoid short circuit of the electronic control system. And damage the device.
9. Regularly check the connection of various moving parts of the equipment. If loose nuts, screws and other fasteners are found, they should be tightened in time to avoid failure of the gate caused by long-term operation.
10. Periodically check the connection of the system's protective ground to ensure its reliable access.
11. Regularly check the connectors and wiring points of the connecting line to ensure reliable connection.
Shenzhen Tongdazhi Technology reminds you that you must take care of the gate during the use of the tripod turnstile, prohibit violent collision, and do not lean or knock. Take care of the gates and do daily maintenance and maintenance work to effectively reduce gate failures and repair costs.
