Waist height stong tripod turnstile popular office gate
TDZ-S286 is the flagship product of our three-roller gates. This three-roller gate is very popular with customers in terms of appearance and function.
Exterior:
This three-roller gate is mainly used in high-end venues, such as high-end office buildings, theaters, museums, government offices, offices, etc. Can be used indoors and outdoors. The four sides of the chassis use an octagonal design, which is very three-dimensional and design sense, not as rigid as the square. There are light indicators around the top cover and in the middle of the case. Normal traffic will display green, and illegal intrusion will display red.
structure:
It is composed of a chassis, a motor, a movement, and a brake lever.
Motor:
Our brushless motors run more smoothly and accurately than ordinary motors. They can be unlocked in only 0.2s and have a longer service life of over 10 million times, which is twice that of ordinary models on the market.
Movement:
Our movement is divided into semi-automatic and fully automatic, with the characteristics of stability, smoothness and low noise
Brake lever:
Using 304 stainless steel material, plus red soft rubber sheath, the texture is softer.
Function:
Our gate opening signal input is a dry contact signal, which means that as long as your access control device can output a signal, it can be directly used to control the opening and closing of the gate. The most common ones are swiping cards, QR codes, fingerprints, passwords, face recognition, temperature measurement equipment, electrostatic meters, etc.
We also have an infrared sensor function, which can prompt illegal intrusion alarm, reverse retrograde alarm, anti-pinch protection, etc. It can automatically drop the pole in case of emergency.
Gate main board:
The motherboard is independently researched and developed by us, with self-checking function, which is convenient for maintenance and use. Various modes can also be adjusted according to the needs of use. For example, induction free pass, one-way pass, two-way pass, etc. The operation can be controlled by the main A small button on the board for programming.
There is also the main board of the gate that supports secondary development, and can be customized according to customer needs.
