What should be paid attention to in the maintenance of Rising bollard ?
What should be paid attention to in the maintenance of Rising bollard ?
Rising bollard, also known as lifting ground column, anti-collision road pile, hydraulic Rising bollard, etc., is an intelligent roadblock equipment. It has strong practicability and environmental adaptability. It is widely used in schools or residential areas, as well as at the door of some important units.
Any article will be damaged or broken down in the process of use, and so will the Rising bollard. Therefore, daily maintenance and regular inspection are the basis to ensure that the equipment can be in the best working efficiency. What are the precautions for the daily maintenance of the Rising bollard?
1. Check the working status of switches, buttons, indicators and buzzers once a month.
2. The transmission mechanism and mechanical fixing mechanism of the equipment shall be fastened with conventional screws.
3. The screws on each wiring terminal and each electrical element shall also be checked once a month to see if they are loose.
4. Regularly remove dust and maintain the Rising bollard equipment surface, electrical control system and hydraulic control system.
5. In the process of electrical maintenance, the relevant power supply shall be cut off in time, and the signs of maintenance and repair shall be hung in an obvious position.
6. Stop working immediately and check the Rising bollard regardless of any abnormal phenomenon of the Rising bollard. Only after the abnormal conditions are solved can it be restarted for work again.
7. Keep the drainage at the bottom of the Rising bollard unblocked and the surrounding clean to ensure the service life, performance and waterproof tightness of the Rising bollard parts. In large ice and snow days, if there is serious ice inside the column, stop the lifting and use after freezing by heating and other methods.
8. Add lubricating oil regularly to ensure flexibility and no jamming during operation. During operation, the "squeaking" friction sound can be basically determined to be due to the lack of lubricating oil. Stop working immediately and find out the reasons. It is not allowed to operate forcibly, which is easy to cause unforeseen hidden dangers.
