Office Building Entrance RFID Card Access Control Korea Speed Gate Sliding Door Turnstile Barrier
- Tongdazhi
- Guangdong China
- 5 working days
- 1000 pcs per month
- TDZ-P237
1. Size: 1500*320*1000mm
2. Material: 304 stainless steel, Thickness: 1.5mm
3. Passing speed: 35 people/min
4. LED directional light
5. Lane width: 600mm
6. Sensor: 6 pairs
7. Anti-pinch. Anti-tailing
8. Dry contact signal input. Can integrate with any access control board
9. When the power failure. arm open automatically.
Office Building Entrance RFID Card Access Control Korea Speed Gate Sliding Door Turnstile Barrier
Feature
1. Abnormal alarm function, user-friendly maintenance and use.
2. Using the multiple anti-clamping designs to protect the personal safety of passengers in
maximum limit.
3. illegal intrusion, trailing alarm, reverse entry, gate is automatically closed.
4. Equipped with the dry contact signal input interface, compatible with all kinds of access
controllers.
5. It will alarm when break in illegally, followed by people,passed overtime,damaged for
equipment.
6. After swiping card in normal condition, if within the permitting time passages do not pass,
the system will cancel the users’ pass right and arm close automatically.
7. Arm automatically open when the power off to make sure safety In case of emergency.
8. Optional for external counter to record the people numbers for each lane.
Company Information
Parameters
Structure parameters | |
Housing material | 304 grade stainless steel |
Thickness | 1.5mm |
Arm material | Acrylic / Soft arm |
Mainboard | Independent development patent mainboard |
Technical parameters | |
Size | 1500x320x1000mm |
Lane width | 550mm |
Arm Length | 260mm |
Passing speed | 35--50 people/min |
Open/close speed | 0.2sec |
Weight | 75KG |
infrared sensors | 6 pairs |
MCBF | 5.000.000 times |
Application | Indoor or outdoor |
Rotating directional | Single way or Bi-directional adjustable |
Noise | <55db |
Operating temperature | -25 to 70℃ |
Relative humidity | 5% to 95% |
Package | Carton box inside. Wooden case outside |
Electronic parameters | |
Power supply | 110-220V/AC, 50/60HZ |
Rated power | 100W |
Input signal | Dry contact |
Driving motor | Brushed motor |
Method of position | Limiter |
A. Check the contact and connection terminal 1,2,3 on counter panelThe failure on main control panel or terminalsA1. Check the terminal 5,6 on main control panel J1 with multi-meter to see the level output;A2. If no level output, check the chip connection with power off, if still no display, it shall be the failure of main control panel, which shall be repaired or changed;A3. If it has level outpu...more