Automatic Brushless Motor Swing Barrier Face Recognition Turnstile Gate For Office And Hotel
- Tongdazhi
- China
- 1 month
- 1000pcs
- TDZ-B368
1. side led light indicate swing barrier gate
2. facial recognition temperature detector function optional
3. widely used for office building ,cinema.
Automatic Brushless Motor Swing Barrier Face Recognition Turnstile Gate For Office And Hotel
Products Description
Parameters
Structure parameters | |
Housing material | 304 grade stainless steel |
Thickness | 1.5mm |
Mainboard | Independent developement mainboard |
Arm material | Acrylic |
Technical parameters | |
Size | 1400x200x1000mm |
Lane width | ≤850mm |
Passing speed | 35--50 people/min |
Open/close speed | 0.1--0.6sec |
Weight | 90KG |
Turning angle | 90 degree |
infrared sensors | 6 pairs |
MCBF | 5.000.000 times |
Application | Indoor or outdoor |
Rotating directional | Single way or Bi-directional adjustable |
Noise | <55db |
Operating temperature | -25 to 70℃ |
Relative humidity | 5% to 95% |
Package | Carton box inside. Wooden case outside |
Electronic parameters | |
Power supply | 110-220V/AC, 50/60HZ |
Rated power | 100W |
Input signal | Dry contact |
Driving motor | Brushed motor |
Method of position | Limiter |
Basic Function
1. The entry and exit directional can be set independently, free mode / forbidden model
2. Automatic reset function: The swing barrier will open the arm after receiving the valid opening signal
when standby. The swing barrier will return to the hindered zero position automatically under the following
situation:
-. Within the allowed time, pedestrians have been detected to pass through the passageway in specified
direction;
-. Over the allowed time, there is no people passing through the passageway.
3.Self-recovery function: The swing barrier do not return to the hindered zero position because of
human intervention. After revoking human intervention, the gate automatically return to the hindered
zero position.
4. Direction indicator: The direction indicator is installed on the top of the housing cabinet to indicate
the valid passing direction
5. Compatibility: Equipped with dry contact signal input interface can make sure compatible with all kinds
of access controllers
Software background
Exhibition & Certificate
Contact
A. Check the contact and connection terminal 1,2,3 on counter panelThe failure on main control panel or terminalsA1. Check the terminal 5,6 on main control panel J1 with multi-meter to see the level output;A2. If no level output, check the chip connection with power off, if still no display, it shall be the failure of main control panel, which shall be repaired or changed;A3. If it has level outpu...more